REMOVE PIN FROM MOLEX CONNECTOR HOW TO

You will notice another lock holding the pin firmly to the connector after removing the top pin lock retainer. Pry The Yellow Lock While Pulling The Pin Connector However, it would be beneficial if you took care to avoid using excessive force so as to prevent harming the pin connector and even the connector itself. To remove it, all you need is a screwdriver or pair of pliers.

Fortunately, pin lock retainers can be removed quite quickly. One is found at the bottom of the connector, and the other is located at the top. There are typically two pin lock retainers on the connector. This retainer exerts pressure on the pin’s lock, making it difficult to remove the pin. Remove The Pin Lock Retainerĭo you see the connector’s black pin retainer? Before moving on to the next step, you must remove it. To achieve this, adhere to the steps listed below. Use a screwdriver to pry the cable that contains the pin from the connector once you have completed step three above. Removing The Wire That Has The Pin Using A Screwdriver In the event that you are unable to obtain the DSUB tool, you might have to use the screwdriver, which takes time. Your ability to purchase the DSUB tool will have a significant impact on the technique you choose. Either a DSUB tool or a screwdriver are acceptable. There are two techniques you can employ to take the wire with the pin out when you get to this stage. Remove The Wire Containing The Pin Connector Wearing gloves will also prevent injuries to your hands in the event that the screwdriver slips while removing the connector’s pin. When you remove the pin from the connector, you can be confident that you won’t receive an electric shock. Take Any Precautionary Measures Neededĭisconnect the battery cables if you are working with a pin connector that receives voltage from the battery. If the color of the pin connector doesn’t make it easy to tell it apart from the others, you can use a marker pen to do so. So, before moving on to the next step, be sure to locate and mark the cable’s position. It’s because some wires have direct connections to the battery.Īdditionally, it will lessen the possibility of removing the incorrect pin connector. You can take any necessary safety precautions with the aid of knowing which connector pin to remove. Use the internet as a resource if you’re unsure of what tools to use for this process. The flat blade screwdriver, DSUB tool, and needle nose pliers are the most typical tools you will require.ĭepending on your method for completing each step, you might also need other tools. Additionally, it will lessen the procedure’s boredom. You can quickly remove the pin from the connector if you do this.

You must gather them and put them in one location so that you don’t have to go looking for a tool to use while moving from one place to another.

REMOVE PIN FROM MOLEX CONNECTOR HOW TO

How To Remove Pins From A Connector? Gather The Tools You have two options after removing the pins: you can either put new ones in or leave the connector without any. As you take the pins out of the connector, take care not to harm it. If it doesn’t, gently wiggle it until it does. The pin should easily exit once the tab has been lifted. Find the tab holding the pin in place next, and gently pry it up. Find a small screwdriver that will fit into the pin’s slot first. There are a few steps you must take in order to remove pins from a connector. How To Remove A Broken Pin From The Connector?.How To Remove Pins From Molex Connector?.How To Pins From The PE3 Connector Should Be Removed?.How To Remove A Pin From The Electrical Connector?.Removing The Wire Containing The Pin Using The Dsub Tool.Pry The Yellow Lock While Pulling The Pin Connector.Removing The Wire That Has The Pin Using A Screwdriver.Remove The Wire Containing The Pin Connector.

Remove pin from molex connector